background image

1/10

UA864 -- Wall-Mounted Active Directional 
Antenna

General Description

The UA864 antenna provides active directional RF coverage in an easy-to-install, low-profile enclosure that can be 

mounted on walls, ceilings, or metal surfaces with improved reception. The paintable, neutral white housing allows 

the antenna to blend into corporate or classroom settings. The 4-position selectable gain switch provides attenua-

tion and boost settings to match the antenna to the environment. UHF variants provide wideband RF coverage.

Features

Low-profile design

Wall or ceiling mounting options

Wideband performance (UHF models only)

Four-position gain switch

Metal surface mounting capability

LED indicators for gain settings

Neutral white, paintable housing

Positioning Antennas for Diversity Reception

The UA864 is a polarized antenna and must be oriented correctly to optimize reception for each transmitter type. 

The gain switch indicates the antenna's orientation. Position the antennas using the following guidelines:

Note: 

The antenna's inner construction may differ for each model variation.

Handheld and Bodypack Transmitters (vertical)

Summary of Contents for UA864











Reviews: