![background image](http://html1.mh-extra.com/html/shure/sw6000-cda/sw6000-cda_user-manual_1262541024.webp)
SW6000 Conference Management Software
User Manual
24
Mimic item-level properties
DotSize allows changing the dot size on a per-control basis. The default is set in the mimic
definition.
ItemStyle defines how the items (dots) on the mimic look like. These styles are predefined.
•
None – nothing is shown for this item.
•
FlippingFlat (default) – a thin squared or circular item, flipping when the state changes.
•
GrowingBar – a squared or circular bar, changing its height based on the state.
Chart control-level properties
Filter property regulates, what data shall be shown: all defined in CAA or a “Show in pie” subset.
Values are None (default) and Pie.
ItemPadding defines how much space shall be around the bars. Value of “1” (default)
corresponds to one row unit (see 4.2.1).
ItemThickness property defines, what defines the thickness of the bars. Values are:
•
None – the thickness is the same for all items on this chart
•
Width (default) – the thickness depends on the width setting in CAA
•
Value – the thickness depends on the actual value; in this case ItemPadding is
recommended to set to 0.
ItemOrientation controls, in which way the items are built up. The Vertical orientation (default)
builds ItemFormat fields vertically, bottom-up. The Horizontal orientation creates a left-to-right
horizontal formation.
Chart item-level properties
BarStyle controls how the actual bar looks like:
•
‘Plain’ value (default) uses a flat 2D bar
•
‘Bar3d’ creates a 3D-like bar
BarContentFormat specifies what data is shown overlaid onto the bar. The format of this field is
the same as for ItemFormat and uses the same fields as chart’s ItemFormat.
MaxBarThickness defines, how large a bar can get (horizontally or vertically) as a percentage of
the control’s size (padding is discarded). For instance, a value of 0.25 cuts the bar, if it becomes
more than ca. 25% of the control.
Default value is 1, unless the ItemThickness is set to Width – then it is 0.25. If any bar is cut,
the chart is placed inside the control according to HorizontalContentAlignment (default Center) /
VerticalContentAlignment (default Top).
Thickness determines, how thick a 3D item shall be shown – both for pie and bar charts.
InternalRadius – a radius of a round hole inside a pie, in relative units (0-1)
PopOutRadius – a radius, on which the slices shall start, in relative units (0-1)
OpacityBeginning and OpacityEnd regulate the opacity (transparency) of the bars and slices; 0 is
fully transparent, 1 is fully opaque.