Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
•
Keep the earphones and sleeves as clean and dry as possible.
•
To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and
replace if necessary. Ear sleeves must be completely dry before reusing.
•
Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.
•
Do not expose earphones to extreme temperatures.
•
Replace sleeves if they do not fit properly.
•
Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.
Bluetooth
®
Earphones
Bluetooth
®
Pairing
1. Turn off the earphones. Press and hold center button on earphone remote
until the LED flashes blue and red.
2. From your audio source, select "Shure BT1."
3. LED turns blue when successfully paired.
For additional pairing options, please visit http://www.shure.com/earphones.
Charging the Earphones
Red LED indicates low battery.
1. Connect earphones to charging device using supplied cable.
2. LED is red while charging.
3. When earphones are charged, LED turns off.
Warning:
Before charging, make sure the product is at room temperature,
between 0 to 45°C (32 to 113°F).
Note:
Use this product only with an agency approved power supply which
meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
Using the Remote
The Center Button
Press and hold
Power on
Press and hold, 5 seconds
Power off
Press and hold, 10 seconds
Bluetooth pair
Click once
Play/Pause
Click once
Answer/End a call
Press and hold, 3 seconds
Decline a call
Phone on, press and hold, 3 seconds
Activate voice assistant
Up and Down Buttons
Click + or -
Volume Up/Down
Press and hold +, 3 seconds
Next track
Press and hold -, 3 seconds
Previous track
Shure Incorporated
SE112-BT1
Shure Bluetooth
®
Earphones
2017/11/27
4/7
