Shure Incorporated
10/15
1.
Tip:
Use a star network topology to update charger firmware. If chargers are connected to each other in a series, firmware up
dates may cause network connection problems.
Connecting Shure Devices to Wireless Workbench
Wireless Workbench lets you control and monitor devices over the network. To get started, visit
download Wireless Workbench software. Wireless Workbench communicates with connected devices over a standard Ethernet
network.
Required equipment:
Shure device, computer with Wireless Workbench installed, Cat 5 (or better) Ethernet cable, and router
or network switch
Connect the device to your computer with a shielded Cat 5 (or better) Ethernet cable to ensure reliable network perfor
mance. If you have multiple devices to manage, connect each device to a router or network switch. The Ethernet port
LEDs on your device will illuminate to indicate network connectivity. Verify that Shure devices can see each other by
looking for the network connectivity icon on the front panel (location varies).
Summary of Contents for SBC840M
Page 15: ...Shure Incorporated 15 15...