General Operation
The ES-9 is an external 9 Volt battery supply for EMG Pickups. If you have an instrument that doesn’t fit a battery, or you don’t want to install a
battery the ES-9 is perfect for you. Using a stereo cable to bring +9 Volts up the Ring contact to the instrument you can power your instrument
easily. The ES-9 also has an external DC input for powering your guitar. See the notes on page 2 about using an external DC Supply. A standby
switch also makes it convenient when changing instruments by shorting the input to the amplifier. In addition, the battery and external DC
supply are protected by a resettable fuse in case the input/output are reversed. instructions are supplied to help you learn about using an
external supply as well as the options available.
INSTALLATION INFORMATION
EMG MODEL:
ES-9 BATTERY POWER SUPPLY
0230-0218rD
PO BOX 4394
SANTA ROSA, CA
95402 USA
P (707) 525-9941
F (707) 575-7046
EMGPICKUPS.COM
INSTRUMENT
AMPLIFIER
AL
SIGNAL
STANDBY
IGNAL
INSTRUMENT
AMPLIFIER
+9 VOLTS
SIGNAL
SIGNAL
STANDBY
INSTRUMENT
AMPLIFIER
VOLTS
AL
SIGNAL
STANDBY
INSTRUMENT
AMPLIFIER
VOLTS
AL
SIGNAL
STANDBY
SPECIFICATIONS
IMaximum External Supply (Volts DC)
18 Volts
Maximum current drain (Fuse Reset)
50mA
2.375
4.375
1.350
© 2011 Copyright EMG INC. All Rights Reserved.
+18V MAX
To Amplifier
Stereo Cable
To Instrument
+9 Volts to Ring
Contact on Guitar Jack
Battery Replacement
Using an External DC Supply
When using an External DC Supply
you do not need to remove the battery !
9-18 Volt Adapter
(See notes about Adapters
on Page 2)
