Shure Incorporated
9/13
1.
2.
3.
4.
5.
•
•
Restoring Factory Settings
Press and hold reset to restore factory settings. All LEDs will flash and turn off as the charger reboots.
IP addressing will be set to automatic, and charger will be in charging mode.
Connecting Shure Devices to Wireless Workbench
Wireless Workbench lets you control and monitor devices over the network. To get started, visit
download Wireless Workbench software. Wireless Workbench communicates with connected devices over a standard Ethernet
network.
Required equipment:
Shure device, computer with Wireless Workbench installed, Cat 5 (or better) Ethernet cable, and router
or network switch
Connect the device to your computer with a shielded Cat 5 (or better) Ethernet cable to ensure reliable network perfor
mance. If you have multiple devices to manage, connect each device to a router or network switch. The Ethernet port
LEDs on your device will illuminate to indicate network connectivity. Verify that Shure devices can see each other by
looking for the network connectivity icon on the front panel (location varies).
For most applications, use the Automatic mode (default) to let your switch or router assign an IP address using DHCP
addressing. If no DHCP server is present, your devices will fall back to a link-local address in the 169.254.xxx.xxx
range. If you need to assign specific IP addresses, set the IP mode to Manual in the Network menu.
Open Wireless Workbench software.
Select a Network Interface in the pop-up window. Choose the network that most closely matches the Ethernet port
where your devices are connected.
Your device will appear in the Inventory tab when the connection is successful.
Configuration Tips
Check your firewall settings to make sure Wireless Workbench has access to your network
Use multiple Ethernet switches to extend the network for larger installations
For more help, visit the Help menu in Wireless Workbench or
Monitoring Batteries with Wireless Workbench
Wireless Workbench provides detailed information for batteries currently docked in the charger. You can also view battery error
notifications and change the charger's network settings.
Click the Inventory tab to view your charger in Wireless Workbench. The charger properties panel provides different battery
statistics:
Summary of Contents for SBC840
Page 13: ...Shure Incorporated 13 13...