Startup
channel
ready
audio
Internal Diver
CHANNEL
6
MUT
E
channel
mute
channel
ready
audio
Internal Antenna Diversity
channel
mute
channel
mute
channel
mute
Follow these simple steps to check for interference and to
set your receiver and transmitter to the same channel
.
If you haven’t installed the
battery, do it now and leave the
cover off.
Turn
ON
the handheld or
bodypack transmitter by
pressing the power button.
The channel display should
illuminate.
The ready LED on the receiver
should be illuminated.
Replace battery cover.
Check to see that the
transmitter and the receiver
display the same channel.
channel
ready
audio
Internal Diversity Antenna Syste
channel
mute
Internal Anten
channel
ready
audio
It turns off after ten seconds to
conserve battery.
Turn
OFF
the microphone
or bodypack.
If left on, it will create a false
busy indicator.
Plug in the power supply.
1
2
There is no power switch.
The channel display should
illuminate.
3
If you see the
Busy
Indicator
(a flashing dash)
change the channel.
4
Press and hold down the
channel button until the
display begins flashing.
Wait for the channel display
to stop flashing.
5
6
7
8
