Shure Microflex MXCW Manual Download

Page: 32 / 86

Shure Incorporated

32/86

Web Applications for Monitoring and Control

Web applications provide convenient, remote access to configure, monitor, and control the system. The application is hosted in

the device on an embedded webserver and can be accessed using the device IP address or DNS name.

MXCW Web Applications

Application

Host device

Features

MXCW system and meet

ing control

Access point (MXCWAPT)

Full configuration and control of the MXCW system, devices,

participants, and live meetings.

Charging batteries

Charging station (MX

CWNCS)

Monitor battery charge and statistics.

Opening the Device Web Application

Connect the computer to the device network.

Open the

Shure Web Device Discovery

application. The application lists Shure devices on the network that provide

computer control.

Summary of Contents for Microflex MXCW























































































Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands

Shure Microflex MXCW, Manual

Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands