Shure Microflex MXCW Manual Download

Page: 13 / 86

Shure Incorporated

13/86

APT Utilities

Network

Shure Control displays the IP address, Subnet, Gateway, and MAC address of the access

point, while Audio Network shows this information for Dante. Set the IP address for each net

work interface to automatic for an assigned IP address, or manual to edit the IP address.

Firmware

Display the access point firmware version and serial number.

Reboot

The unit performs a power cycle.

Wireless

RF Power

Select the RF coverage level of the access point, or turn it off.

Conference Unit (MXCW640)

MXCW conference units facilitate communication between participants in group meetings and conferences. The multifunctional

units enable participants to speak and be heard with clarity, even in large multilingual events, by combining a gooseneck micro

phone, loudspeaker, headphone jack, and user controls. For advanced meeting tasks, MXCW conference units include fea

tures for voting, managing speakers, and more.

①

Loudspeaker

Provides a clear audio signal of the floor mix.

②

Microphone Connector

Lockable 10-pin microphone connector for MXC gooseneck microphones.

Summary of Contents for Microflex MXCW























































































Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands

Shure Microflex MXCW, Manual

Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands