background image

Shure Incorporated

3/12

CAUTION

Do not immerse in water, such as while taking a bath or washing your face, otherwise sound deterioration or 

failures may result.

Do not use while sleeping as accidents may result.

Use a slow twisting motion to remove the earphones. Never pull on the earphone cord.

Stop using the earphones immediately if they are causing great discomfort, irritation, rash, discharge, or any 

other uncomfortable reaction.

If you are currently receiving ear treatment, consult your physician before using this device.

WARNING

• Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disas-

semble, heat above 140°F (60°C), or incinerate.

Follow instructions from manufacturer

Do not short circuit; may cause burns or catch fire

Do not charge with products other than those specified in this user guide.

Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or 

the like

Note: 

Use only with the included power supply or a Shure-approved equivalent.

Note: 

Battery replacement to be performed only by Shure authorized service personnel.

Please follow your regional recycling scheme for batteries, packaging, and electronic waste.

General Description

The Shure KSE1500 analog electrostatic earphones are the result of many years of research, development, and 

technological advancements from the Shure engineering team. The electrostatic drivers deliver premium quality, 

high definition audio for the first time in an in-ear design, which provides superior comfort and isolation from out-

side noise. The earphones are powered by the KSA1200: a compact, portable, analog electrostatic amplifier for 

connecting to your preferred audio source. A full set of furnished accessories includes interchangeable sound iso-

lating sleeves for a comfortable, personalized fit. From studio monitoring to casual listening, the KSE1200SYS re-

veals the detail and nuances to satisfy the most critical ears.

Features

Portable Electrostatic Amplifier

100% analog signal path

Powered by an internal, rechargeable Lithium-ion battery

-10db input pad

Input sensing and audio metering LED

Earphones

Low distortion characteristics

Summary of Contents for KSA1200













Reviews: