background image

Shure Incorporated

22/32

1.

2.

3.

1.

2.

3.

Note:

 Group 3 should only be used in controlled Wi-Fi environments to prevent interference from unexpected Wi-Fi devices.

Selecting a Group

Press and hold the group button for 2 seconds until the group display flashes.

Press the group button to scroll through the available groups.

The receiver will automatically save the selected group.

Selecting a Channel

Press and hold the channel button for 2 seconds until the channel display flashes.

Press the channel button to scroll through the available channels.

The receiver will automatically save the selected channel.

Note:

 A double dash symbol

--

 displayed on the receiver screen during a channel scan indicates that there are no available channels within the selected group. 

Choose a group with more channels and repeat set up steps.

Troubleshooting

Issue

Indicator Status

Solution

No sound or faint sound

Receiver RF LED on

Verify all sound system connections or ad­

just gain as needed (see Adjusting Gain).

Verify that the receiver is connected to mix­

er/amplifier.

Receiver RF LED off

Turn on transmitter.

Make sure the batteries are installed correct­

ly.

Link transmitter and receiver (see Linking 

topic).

Charge or change transmitter battery.

Receiver LCD screen 

off

Make sure AC adapter is securely plugged 

into electrical outlet.

Make sure receiver is powered on.

Transmitter indicator 

LED flashing red

Charge or change transmitter battery.

Transmitter plugged 

into charger.

Disconnect transmitter from charger.

Audio artifacts or dropouts

rf LED flickering or off

Change receiver and transmitter to a differ­

ent group and/or channel.

Summary of Contents for GLXD14

































Reviews: