How To Order
DT 6008 Digital Transmitter
13 11 05858
DT 6032 Digital Transmitter
13 11 05860
RA 6013 Infrared Radiator
14 09 05494
RA 6025 Infrared Radiator
14 09 05495
DR 6004 Digital Receiver
14 10 58731
DR 6008 Digital Receiver
14 10 58741
DR 6032 Digital Receiver
14 10 58771
Specifications
Controls:
2 x 16 character LCD display for status information and transmitter
configuration
Rotary push button for navigation through menus and configuration
Power on/off switch on front panel
Connectors:
Male Euro socket for main connection
8 or 32 RCA-phono connectors for input of asymmetrical audio signals
Two XLR sockets for input of symmetrical signals of floor, emergency
messages or music
One terminal block socket for distribution of emergency messages to all
channels
3.5 mm stereo headphone socket for monitoring inputs and channels
One BNC connector for accepting an HF signal from another transmitter
Six BNC connectors for output of HF signal to up to 30 radiators
General
Power consumption
Max. 55 W
Power consumption
(standby)
29 W
Mains voltage
100 - 240V, 50 - 60 Hz
Temperature to guarantee
specified performance
5°-40° C (35-80% humidity)
Storage temperature
-20°- 60° C (10-80% humidity)
Weight
4 kg with mounting brackets
Dimensions (W x H x D)
425 (483) x 87 x 317 (357) mm
(dimensions in brackets are
incl. the 19" mounting brackets)
Electrical Characteristics
Assymmetrical audio inputs
-6 to +6 dBV nominal
Symmetrical audio inputs
+6 to +18 dBV nominal
Emergency switch connector
emergency control input
Headphone impedance
32 Ohm to 2 kOhm
HF input
Nominal 1Vpp, min. 10 mVpp,
75 Ohm
HF output
1 Vpp, 6 VDC, 75 Ohm
System Audio Performance
Measured from the audio input of an DT 6000 Digital Transmitter to the
headphone output of an DR 60xx Digital Receiver
Audio frequency response
20 Hz to10 kHz (-3 dB) at
Standard Quality
20 Hz to 20 kHz (-3 dB) at
Premium Quality
Total harmonic distortion at
1 kHz
< 0.05 %
Crosstalk attenuation at 1
kHz
> 80 dB
Dynamic range
> 80 dB
Weighted signal-to-noise
ratio
> 80 dB(A)
Certifications
The DIS Digital Infrared System fully complies with the IEC 61603-PART7,
which is the industry standard for digital infra-red transmission in the 2 to 6
MHz frequency band.
Data subject to change without notice.
