DCS 6000 Digital Conference System
User Manual
11
Connection Details
DCS-LAN Chain
The DCS 6000 system uses shielded Cat5e, Cat6
or Cat7 F/UTP or U/FTP cables with shielded RJ45
connectors.
EIA 568-B wiring shall be used.
Important:
The names of Cat5/6/7 cable type have
changed.
Old name
New name
FTP
F/UTP
STP
U/FTP
UTP
U/UTP
Important:
Use only F/UTP or U/FTP (shielded) cables
and shielded RJ45 connectors and not U/UTP cable,
which are unshielded.
How to wire a Cat5e (EIA 568-B) cable to a RJ45
con.:
Pin
Function
Connector #1
Connector #2
1
In-going +
ORG/WHT
ORG/WHT
2
In-going -
ORG
ORG
3
+48V
GRN/WHT
GRN/WHT
4
0V
BLU
BLU
5
0V
BLU/WHT
BLU/WHT
6
+48V
GRN
GRN
7
Outgoing -
BRN/WHT
BRN/WHT
8
Ou
BRN
BRN
Important:
If other color codes are used then the four
pairs are connected as follows:
Pair 2:
Pin 1 & 2
Pair 3: Pin 3 & 6
Pair 1:
Pin 4 & 5
Pair 4:
Pin 7 & 8
The phase of the pairs must be correct and the
wiring spec. as stated in Cat5e (EIA 568-B) have
to be followed.
Note:
Cat6 and Cat7 cables can normally only be
terminated in sockets (female) and not in cable plugs.
Cat6 and Cat7 can thus only be used for feeding cables
terminating in wall outlets or patch panels.
Accessories
Cat5e Connection Cables (AWG24)
EC 6001-0.5 ..................... Connection Cable 0.5 m
EC 6001-01 ......................... Connection Cable 1 m
EC 6001-02 ......................... Connection Cable 2 m
EC 6001-05 ......................... Connection Cable 5 m
EC 6001-10 ....................... Connection Cable 10 m
EC 6001-20 ....................... Connection Cable 20 m
EC 6001-50 ....................... Connection Cable 50 m
DH 6021 .............................................. Headphone
CO 6000 RJ45 terminator DCS LAN Termination Plug
