![background image](http://html1.mh-extra.com/html/shure/blx1/blx1_manual_1262333015.webp)
Shure Incorporated
15/26
Removing and Installing Identification Caps
The BLX2 is equipped with a black identification cap from the factory (dual vocal systems ship with additional gray
cap).
To remove:
Remove battery cover. Squeeze sides and pull off cap.
To install:
Align the cap and click into place. Replace battery cover.
An Identification Cap Kit containing assorted colored caps is available as an optional accessory.
Troubleshooting
Issue
Indicator Status
Solution
No sound or faint sound
Receiver ready LED on
•
Verify all sound system connections or adjust
gain as needed (see Adjusting Gain)
•
Verify that the receiver is connected to mixer/
amplifier
Receiver ready LED off
•
Turn on transmitter
•
Make sure the batteries are installed correctly
•
Perform transmitter setup (see Single System
Setup)
•
Insert fresh batteries
Receiver LED screen off
•
Make sure DC adapter is securely plugged into
electrical outlet.
•
Make sure receiver is powered on.