Shure Incorporated
6/22
◦
◦
◦
1.
2.
⑧
RF input status LED
Indicates the voltage status of the RF input.
Green = DC voltage on
Red flashing = fault condition
Off = DC voltage off
⑨
RF cascade ports
Passes the RF signal to additional components.
⑩
Temperature activated fan
Ensures top performance in high temperature environments. Clean fan screen as needed to maintain airflow.
Connecting Antennas
Two antennas allow the Spectrum Manager to capture scan data and analyze the RF signals used in diversity receiver applica
tions. If active antennas are used, set
Antenna DC Power
to
On
.
To use front-mounted antennas:
Insert the bulkhead adapters on the supplied front-mounting cables through the holes in each bracket and secure them
from the front using the supplied hardware.
Connect the supplied antenna cables to the antenna input BNC connectors on the rear panel.
Mounting Instructions
This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to the rack.