![background image](http://html1.mh-extra.com/html/shure/adx5d/adx5d_manual_1262628023.webp)
Shure Incorporated
23/33
◦
◦
Flashes the display of a transmitter linked to the receiver.
Activate (ADX transmitters linked to ShowLink access point)
Press O to send RF mute to all other slots.
SL Test
Press O to measure the boundaries of ShowLink coverage.
Tx Details
Displays build details and vital statistics for the selected transmitter.
IR Presets
Configuring IR presets allows all transmitter parameters to be automatically set from the receiver during an IR sync. Use the
control wheel to select and edit transmitter parameters from the preset list. Select
No Change
to keep existing settings.
Advanced
Interference Mgmt
Select interference detection setting for the channel.
Frequency Diversity
Configure frequency diversity for handheld or bodypack transmitters. Choose between:
Combining: For use with a single ADX2FD handheld transmitter
Selection: For use with a pair of AD1 or ADX1 series transmitters
FD-S Advanced
Configure frequency diversity for handheld or bodypack transmitters.
Talk Switch
Set receiver output signal routing options for talk switch control from a transmitter. For more information about using a talk
switch with an Axient Digital transmitter, see the talk switch user guide.
Standby
Put this channel on standby to conserve power when you aren't using it.
ShowLink Remote Control
ShowLink remote control enables realtime remote adjustments of all transmitter parameters using a wireless network connec
tion between linked Axient transmitters and receivers. Whether performers are in the middle of a presentation or off stage wait
ing for their cue, ShowLink lets you make crucial changes to transmitter settings without interrupting the performers.
Within the 2.4 GHz spectrum, 16 channels are available for ShowLink communication. To ensure reliable communication, any
device that can act as a ShowLink access point contains an internal scanning radio that analyzes the 2.4 GHz spectrum hun
dreds of times per second. If interference is detected, the device uses channel agility to automatically switch to a clear channel
within the spectrum. All transmitters associated with the access point will continue to communicate uninterrupted on the new
ShowLink channel. If ShowLink goes offline for any reason, audio transmission will not be interrupted.
DRAFT
- REVIEW
ONLY