CABLE SECURING
FIGURE 2
BOOM OR STAND ATTACHMENT
Remove the foot-type mount (1) from the A88SM frame
by unscrewing the knob (2) holding it in place and sliding the
foot out of the frame. Insert the swivel (3) in the foot mount
slot, replace the knob, and tighten the knob securely.
Attach the swivel to any
5
/
8
”-27 or
3
/
8
”-16 thread micro-
phone boom or stand, or to any
5
/
16
”-18 thread boom or
stand using the supplied adapter (4). Loosen the adjustment
knob, position the A88SM in the desired direction, and tight-
en the knob. Insert the microphone, and secure and attach
the cable as described above.
PISTOL GRIP ATTACHMENT
To use the A88SM with certain popular pistol grips such
as those made by Rycote and Sennheiser, remove the foot
mount (1) from the A88SM frame by removing the knob (2)
and sliding the foot mount out of the frame. Four aluminum
washers are supplied with the A88SM. Insert the pistol grip
adapter (6) with the two thin washers in the frame slot (see
Figure 3), replace the knob, and tighten it securely. Insert the
pistol grip adapter in the Rycote pistol grip frame and tighten
it securely.
If a Sennheiser pistol grip is to be used, insert the pistol
grip adapter in the pistol grip with both thick aluminum wash-
ers. Then tighten the pistol grip locking screw.
PISTOL GRIP MOUNTING
FIGURE 3
SHURE Incorporated Web Address: http://www.shure.com
222 Hartrey Avenue, Evanston, IL 60202–3696, U.S.A.
Phone: 847-866–2200 Fax: 847-866-2279
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 852-2893-4290 Fax: 852-2893-4055
Elsewhere, Phone: 847-866–2200 Fax: 847-866-2585
