1/9
A310-FM -- Installation Guide
Permanent Table Installation
The tube and wing nut required to install the rack tray are included with the MXA310 microphone. Refer to the
MXA310 user guide for replacement part information.
Tip:
This process assumes that both ends of the network cable are accessible. If the other end of the network ca
ble is not accessible, before installing the tube and plugging in the microphone (step 2), you must guide the cable
through the hardware components in the following order:
1. Wing nut (see image for correct orientation)
2. Bracket (under table)
3. Table
4. Tray (above table)
