background image

Shure Incorporated

3/4

The table below describes five popular stereo pickup sys-tems. It specifies microphone types, angles and spacing. 

Those with coincident spacing have their diaphragms verti-cally in line. Closely spaced microphones have their 

dia-phragms separated by the specified distance. These and other microphone systems are detailed in the book 

“Stereo Microphone Techniques” by Bruce Bartlett (1991, Focal Press. ISBN 0-240-80076-1) and in “Microphone

 

Tech-niques for Music Studio Recording” (AL1265) available from Shure Incorporated.

Stereo Pickup Systems

Microphone Types

Microphone Configurations

X-Y

2 Cardioid

Axes of maximum re-

sponse at 135°; spacing: 

coincident

ORTF (French Broad-

casting Corporation)

2 Cardioid

Axes of maximum re-

sponse at 110°; spacing: 

17 cm. (7 in.)

NOS (Dutch Broadcast-

ing Foundation)

2 Cardioid

Axes of maximum re-

sponse at 90°; spacing: 

30 cm. (12 in.)

Blumlein Pair or stere-

osonic

2 Bidirectional

Axes of maximum re-

sponse at 90°; spacing: 

coincident

MS (Mid-Side)

1 Cardioid

1 Bidirectional

Cardioid and bidirectional 

forward pointed; spacing: 

coincident

Full Two Year Warranty

Shure warrants this product to be free in normal use of any defects in workmanship and materials for two (2) years 

from the date of purchase. If your Shure product fails within this period, call 1-800-516-2525 in the United States 

for details on repair, replacement, or refund. In Europe, contact Shure Incorporated Europe GMBH at +49 (7262) 

Summary of Contents for A27M

Page 1: ...oincident or closely spaced mounting with a wide range of directional angles and vertical microphone separations of 1 1 4 inches 31 8 mm 2 5 8 inches 66 7 mm or 4 inches 102 mm The A27M consists of two vertically stacked sec tions that rotate on their centers Each contains a 5 8 27 threaded stud and locking ring to accept a variety of microphones The bottom section contains a 5 8 27 adapter for mo...

Page 2: ...nd position the microphones for the desired response angles The top of the knurled knob contains reference marks every 45o these may be used to position the microphones at the desired angle see Figure 1 6 Tighten the knurled knob attach the microphone cables and use the supplied cable clamp to fasten the micro phone cables to the A27M 7 Raise the microphone stand to the desired height Fig ure 2 sh...

Page 3: ...dioid Axes of maximum re sponse at 135 spacing coincident ORTF French Broad casting Corporation 2 Cardioid Axes of maximum re sponse at 110 spacing 17 cm 7 in NOS Dutch Broadcast ing Foundation 2 Cardioid Axes of maximum re sponse at 90 spacing 30 cm 12 in Blumlein Pair or stere osonic 2 Bidirectional Axes of maximum re sponse at 90 spacing coincident MS Mid Side 1 Cardioid 1 Bidirectional Cardioi...

Page 4: ...or 49 7262 924 90 service hotline or contact your authorized Shure distributor This warranty does not cover abuse or misuse of the product use contrary to Shure s instruction ordinary wear and tear an act of God or unauthorized repair ...

Reviews: