Model 92E
Users Guide
Specifications
Stylus
Stylus Grip Color
Output (1 kHz at 5 cm peak recorded velocity) †
Frequency Response
Channel Bal
-
ance
Channel Separation
Tracking Force*
M92E
Biradial (elliptical),
.4 x .7 mil
Red
5.0 mV
20 to
18,000 Hz
Within
2 dB
20 dB
at 1
kHz
0.75 to 1.5
grams
(1.25 grams
optimum)
N78S
78 rpm , spherical,
Green
4.0 mV
20 to
17,000 Hz
Mono
Mono
1.5 to
3 grams
†Output voltages given for stereo cut record; for MONO cut record, output voltage
at both left channel and right channel cartridge terminals will be 71% of figure above.
*Do not exceed maximum indicated tracking force.
Optimum Load:
47,000 ohms resistance in parallel with 200 to 300 picofarads capacitance
per channel. Load resistance can be up to 70,000 ohms with almost no audible change in
frequency response. Total capacitance includes both tone arm wiring and amplifier input
circuit.
Certification
: Conforms to European Union directives, eligible to bear CE marking; meets
European Union EMC Immunity Requirements: EN 50 082-1, 1992.
Net Weight:
7.3 grams including standard 1/2 in. mounting adapter. Without adapter,
cartridge is compatible with pre-set P-Mount arm.
THiS CaRTRidGE FEaTURES THE SHURE BiRadiaL NUdE diaMONd Tip
Its contact area is longer and narrower
than the traditional spherical tip-groove
contact area. This results in dramatic
reduction of both harmonic distortion
and inter modulation distortion.
To clean the stylus, use a soft brush
with alcohol or an alcohol-distilled
water solution. Brush only from back to
front as shown. Commercial cleaning
solutions may cause stylus damage.
©2005, Shure Incorporated
27B2172 (Rev. 2)
Printed in U.S. A.
Stylus Cleaning
A
VIEW IN DIRECTION A
27B2172_M92E.indd 1
8/22/2006 3:34:37 PM
