FIGURES
•
©2001 Shure Communications Incorporated. Printed in the U.S.A. AL27A6000A 400
™ Shure Communications and the ShureComm “web” logo are trademarks of Shure Communications Incorporated. ®Shure, MODULINK, and ARMO-DUR are registered trademarks of
Shure, Incorporated. ™ Million-Cycle Plus and Top-talk Sound Channel are trademarks of Shure Incorporated. All other trademarks are the property of their respective owners.
1676 BARCLAY BOULEV ARD
BUFFALO GROVE ILLINOIS, 60089
TEL 847.353.3100
FAX 847.353.3131
WWW.SHURECOMM.COM
TYPICAL FREQUENCY RESPONSE
FIGURE ONE
OVERALL DIMENSIONS
FIGURE TWO
MICROPHONE INPUT CIRCUITS
FIGURE THREE
MICROPHONE CASE REAR
FIGURE FIVE
NON-DC-BIASED INPUT CIRCUITS
FIGURE SIX
885TT REAR CIRCUIT BOARD JUMPER LOCATIONS
FIGURE SEVEN
885TT REAR CIRCUIT BOARD LOCATIONS FOR
LOGIC-INVERTING MODIFICATIONS
FIGURE EIGHT
NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
MODEL ALM-1 CABLE WIRING
FIGURE FOUR
