5
SHENZHEN SHUNXUN ELECTRONICS CO.,LTD
www.foxun.com
120m HDMI Extender over Ethernet, with RS232, POE, IR
4 bits DIP Switch:
Use 4bits DIP switch to select 16 group ID(such as 0001,0010,0101 etc,)
Default RX unicast IP address is 192.168.168.56, it can be configured from webpage.
RX Group IP address: 239.168.168. XXX (XXX is the value of bits[2:0])
User should configure the DIP switch within 10 seconds, firmware should reset the
system 20 second after detecting the first change of DIP switch, and latch the new
DIP switch value after reset.
Application 1:
Point to point configuration:
1. Connect one HDMI Cable between the HDMI output port of source device and the HDMI input port of
Transmitter unit
2. Connect one HDMI Cable between the HDMI input port of display and the HDMI output port of Receiver
unit.
3. Connect one UTP Cat5e or better cables between the RJ45 port of Transmitter unit and RJ45 port of
Receiver unit.
4. Connect 5V DC power supplies to both Transmitter unit and Receiver unit.
5. Power on the output device first and the source second.
Please make sure power on the transmitter and receiver first, then power
on the source!
HDMI cable
RS232 cable
RS232 cable
IR-TX cable
IR-RX cable
DVD or STB remote
HDMI cable
HDMI Display
HDMI cable
HDMI Source
Transmitter
Receiver
Free rotate camera
PC
