Shenzhen shumatt technology Co., ltd
4
①
ON/OFF button Injector test turn of/off button
②
LED Display
③
COUNTE button When it shows zero time, injector will
keep working not stopping.
④
MODE button
A
，
Press MODE button shortly can switch to different
condition
（
CL VL VE LL TL U1 U2
）
B
，
Press MODE button can transfer between injector test
mode and resistence test mode(Works only when injector
stop working.)
C
，
After getting into electric testing mode, connect to
injector firstly, press COUNTE one time shortly, 2s after will
show resistance of injector, in the way of
mΩ
.
D,If there is great differences between testing resistance
and actual resistance, need adjust it. How to adjust
：
Stop in resistance testing interface, make injector’s two
clips short circuit, then press ADJ button long
time,screen’s right above will show “*” , when “*”
disappear, adjustment is done.
⑤
ADJ switch nutton Regular parameter setting
First step: Press down shortly to choose seting,relative
position will show cursor. Show the below: Choose injector
brand,counter value,pulse width, frequency.
Second step: Switch left or right to revise current settings.
⑥
Language setting
：
If current language is English, turn
offthe power first, when screen turn black, press ON/OFF
and MODE buttons
，
then turn on the power, it will show in
Chinese. If current language is Chinese, when screen turn
black, press ON/OFF and MODE buttons
，
then turn on the
power, it will show in English.
8 Screen parameters show
①
Choose injector model
：
BOSCH,DENSO,DELPHI,PIZEO,DENSO2
②
Choose injector condition
：
CL VL VE LL TL U1 U2
③
Injector counter way
：
count by times
，
0-2000 times
④
Injector start sign
：
The icon means injector start fuel
injecting
⑤
Pulse width
：
100-3000μS
⑥
Fuel injecting frequency
：
1-30Hz
⑦
Counter sign
：
Icon means injector start counting.
1.5
Specification
Specification
Length
36 cm
Volume
17280 cm³
Width
32 cm
Weight
4000 g
Height
15 cm
Parameter
Length
37.5 cm
Volume
20728.12
cm³
Width
33.5 cm
Weight
4500 g
Height
16.5 cm
2
SAFETY INFORMATION
(1) Non-professionals are not allowed to disassemble and
repair the equipment.
(2) This tool should avoid contact with children, to avoid
danger, if a child swallows small parts, please rushed to the
hospital immediately for treatment.
(3) Avoid products under high temperature operation;
avoid squeezing, to avoid danger.
(4) Do not throw, down or stepping on the device, to
avoid the risk of the holder by a strong external impact
occurs.
3 SALE STATEMENT
(1) Products and components warranty period of three
months, the warranty period for the first time from the
product purchase date (to purchase formal credentials
date) starting time of purchase date to purchase the
product warranty registration card, whichever date;
(2) Provides free product debugging and testing. To
obtain warranty service, you can contact directly with the
seller or an authorized service agency can also call our
telephone service, contact us by our service personnel
placement services.
4 DISCLAIMER
If Products exist the following conditions, warranties and
service under this document will not apply:
(1) The product or component has exceeded the warranty
period;
(2) Failure or damage caused by the operation, not in
accordance with the instructions for use;
(3) The use of the device or replace the original
equipment malfunction or damage caused when
