Shenzhen Shumatt Technology Co., Ltd.
4
1.4 Specifications
Specification
No.
Name
parameter No.
Name
parameter
1
Length
21 cm
4
Volume
2793 cm
³
2
Width
19 cm
5
Weight
750 g
3
Height
7 cm
Packing parameters
No.
Name
parameter No.
Name
parameter
1
Length
22.5 cm
4
Volume
3920.625
cm
³
2
Width
20.5 cm
5
Weight
1250 g
3
Height
8.5 cm
2 .SAFETY INFORMATION
(1) Non-professionals are not allowed to disassemble and
repair the equipment.
(2) This tool should avoid contact with children, to avoid
danger, if a child swallows small parts, please rushed to the
hospital immediately for treatment.
(3) Avoid products under high temperature operation;
avoid squeezing, to avoid danger.
(4) Do not throw, down or stepping on the device, to avoid
the risk of the holder by a strong external impact occurs.
(5) Do not insert foreign objects into the connector portion
of the holder.
(6) In connection, pay attention to thread alignment, there
is no alignment cannot be forced to install.
3. SALE STATEMENT
(1) Products and components warranty period of three
months, the warranty period for the first time from the
product purchase date (to purchase formal credentials
date) starting time of purchase date to purchase the
product warranty registration card, whichever date;
(2) Provides free product debugging and testing. To obtain
warranty service, you can contact directly with the seller or
an authorized service agency can also call our telephone
service, contact us by our service personnel placement
services.
4. DISCLAIMER
If Products exist the following conditions, warranties and
service under this document will not apply:
(1) The product or component has exceeded the warranty
period;
(2) Failure or damage caused by the operation, not in
accordance with the instructions for use;
(3) The use of the device or replace the original equipment
malfunction or damage caused when removable parts;
(4) Because of unexpected factors or human factors
(including operational errors, scratches, handling, bump,
improper voltage caused by fault or damage.
(5) Failure or damage due to force majeure or accidents
caused;
(6) The other is not our equipment (including components)
quality problems caused by failure or damage;
Note
: Information subject to change without prior
separate notice, please refer to the company
website announcement. As you encounter this
situation, you should find a solution to the
responsible party, Shenzhen shumatt Technology
Co., Ltd. does not assume any responsibility.
5. PRODUCT MAINTENANCE
(1) When cleaning, use a damp cloth, cleaning treatment
with neutral detergent, and then wipe dry water stains.
(2) Severe surface stains, scratches, burns fireworks, you
can use fine sandpaper (400-500) light grinding surface,
and then use scouring cloth wipe dry.
(3) Avoid contact with acid, brine and other corrosive
substances.
(4)To keep clean, the use of careless caused surface water
stains, use a cloth to dry, keep the surface dry.
6. CERTIFICATE
Certificate
Product name
：
Carter 320D Common Rail
Injector stroke measurement
tool
Model number
：
CRT070
Manufacture Date
：
Inspectors
：
