•
For having more than one additional outdoor transmitter select with the 1/2/3 switch in the battery
compartment of the outdoor transmitter for each single outdoor transmitter a different channel. The
reception of the new transmitter will be transmitted automatically to the
receiver
. Press and hold the
button on the
receiver
or restart the
receiver
according to the manual.
•
The outdoor values will be shown on the display of the
receiver
. If you have installed more than one
outdoor transmitter, press the button on the
receiver
to change between the channels 1 to 3.
•
You can also choose an alternating channel display. After the third channel, press the button
again,
the
numbers
and temperature value of
each
channel
will
cycle
display
.
•
Press the button again to deactivate the alternating channel and the first outdoor transmitter
will be shown permanently.
•
Once registered outdoor transmitters (channels),which are no longer needed,can be deleted manually
by pressing the button for three seconds.Once a new outdoor transmitter is received, there
will be another indicator.
12. Additional outdoor transmitters
Note:
1.Each channel can be individually registered.(e.g.:hold button for three seconds in
channel 1, then channel 1 will deleted and re-register,channel 2 and 3 no changed).
2.After change the batteries of registered outdoor transmitters, it need hold button for
three seconds to re-register the transmitter.
-14-
