Safety Information
It is important that this machine is installed, maintained and used correctly to avoid the risk of
injury.
This machine contains dangerous voltages and rotating mechanical parts.
•
Use the machine only for the purposes described in the Operating Manual
•
This machine is to be used only by trained personnel
•
Do not operate without the guards properly in place
•
The machine is to be serviced or repaired only by suitably trained or qualified personnel.
Always switch off the machine from the mains supply before freeing card jams or removing any
covers.
The machine can be stopped in an emergency by pressing down the red mushroom button
(with a yellow disc) located on the top of the machine.
The machine can be stopped at any time by pressing the red (0) switch.
A red neon indicator on the control panel is illuminated to warn when electrical power is
connected.
It is recommended that metal staples are removed prior to shredding, as staples cut during the
shredding process will leave sharp pieces in the shredded material, which could cause injury
during handling.
•
The machine uses a 230V(±10%), 50Hz, single-phase AC supply
•
To protect against electrical shock, do not immerse the plug or mains cable in water or
spray with liquids
•
Unplug from the electrical supply when not in use
•
Do not operate this machine with a damaged mains cable or plug
•
To disconnect from electrical supply, grip the plug - do not pull on the mains cable
THIS MACHINE MUST BE EARTHED
The wires in the mains cable are coloured as such:
Green
/
Yellow
Earth
Blue
Neutral
Brown
Live
3
Summary of Contents for 282
Page 1: ...Model 282 Operating Manual 28 OM131 1 English Original ...
Page 12: ...12 Wiring Diagram ...
Page 13: ...Wiring Diagram 13 ...
