Showven SPARKULAR PRO BT71, User Manual, Page: 5 / 8

For better performance of SPARKULAR PRO, please don’t change the default value of density without permis-
sion from SHOWVEN.
Press “MENU” 3 seconds to enter the advanced setup interface, press MENU key to enter
different options, wait 3 seconds to return to the main interface.
Advanced Menu
Option
Set Temperature
LCD Backlight
Density@ Height 1
Density@ Height 2
Range Explanation
Density@ Height 3
Density@ Height 4
Density@ Height 5
Density@ Height 6
Density@ Height 7
Density@ Height 8
Density@ Height 9
Density@ Height 10
Mode Selection
Motor Protect
Standby Switch
580-620
On/Off
80
80
80
80
80
100
100
100
40-100
40-100
Factory Mode
User Mode
On/Off
On/Off
Default is 580. Please don't change default value without
engineer's suggestion from SHOWVEN.
LCD screen backlight ON/OFF
Sparks density @ Height gear 1
Sparks density @ Height gear 2
Sparks density @ Height gear 3
Sparks density @ Height gear 4
Sparks density @ Height gear 5
Sparks density @ Height gear 6
Sparks density @ Height gear 7
Sparks density @ Height gear 8
Sparks density @ Height gear 9
Sparks density @ Height gear 10
Factory mode is for engineer only. When in Factory mode
machine can’t controlled by DMX console/host controller
Motor protect function, default setting is Off
When ON, the machine can firing only when heating up was
finished
4