ShowTex Rail H100, Installation Manual

Page: 15 / 22

15
SHOWTEX INSTALLATION MANUAL RAIL H100 ROPE CONTROLLED
1
3: Secure nut (M10).
2: Fasten threaded rod (M10) hand tight.
1: Loosen nut (M10).
2
3
2: Fasten the bolts (M6) on the top side hand tight, give an extra ½ turn to secure.
1: Align the rail end in the middle of the coupler.
4: Fasten the bolts (M6) on the top side hand tight, give an extra ½ turn to secure.
Realign if you feel a height difference!
3: Align the rail end of the second section in the middle of the coupler.
SECURE MOUNTING BRACKETS

Fasten the bolt (M6) hand tight in case you are using another type of bracket.
Applies for:
1. Ceiling bracket
2. Wall bracket
3. Horizontal wall bracket
4. Vertical wall bracket
SECURE COUPLER
BACK TO LIST