background image

DISCLAIMER & COPYRIGHT

No part of this publication may be duplicated or edited in any form or 
by any means, including any type of electronic or mechanical method 
without prior written permission from ShowTex.

ShowTex NV and its employees are fully aware of their task to provide a reliable edition 
of this document. Nevertheless they can accept no liability for (the direct or indirect 
consequences of) imperfections that might remain in this edition. The material in this 
manual is subject to change without notice.

All products from the ShowTex Rental range are supposed to be returned in the same state 
as they were rented. Please treat our products with care, allowing the next user to enjoy 
the products as much as you did. The rented products are internally checked according to 
the general rental conditions. Be sure to check our rental guidelines on our website before 
installing and using this product:

http://www.showtexrental.com/showtex-rental-guidelines.

Read and understand this user manual before installing and 
or operating the automatic reveal system. Failure to follow the 
instructions in this document could result in serious injury!

As a result of the above warning, any ShowTex product must be installed 
and operated by a qualified technician who has knowledge of its 
capabilities as well as its limitations.

Following the guidelines of this manual will reduce the risk of damaging the 
equipment or injuring yourself and the people around you. Damage to the system 
caused by any other method of installation than the one shown in this manual can 
only be repaired or fixed at the customer’s expense.

CONTENT

Disclaimer & copyright ................................................................................................................................................................. 2
Intro ..................................................................................................................................................................................................... 3
Warranty ............................................................................................................................................................................................ 3
Product description ....................................................................................................................................................................... 3
Safety instructions ......................................................................................................................................................................... 3

Max load & distance .............................................................................................................................................................. 4

Technical specifications ............................................................................................................................................................... 5

Components ............................................................................................................................................................................ 5
Assembled Kabuki 30 ........................................................................................................................................................... 6

Front, top and bottom plan view ............................................................................................................................ 6
Side and exploded view ............................................................................................................................................. 7

Installation ........................................................................................................................................................................................ 8

Necessary steps ...................................................................................................................................................................... 8
Necessary tools ....................................................................................................................................................................... 8
How to........................................................................................................................................................................................ 9

Fasten the 100 Kg Hook Clamp ................................................................................................................................ 9
Connect the Kabuki and the remote control ....................................................................................................10
Arm the Kabuki  ...........................................................................................................................................................11
Grip the fabric or the ribcord ..................................................................................................................................12
Release the Kabuki manually ..................................................................................................................................13

Care & maintenance  ...................................................................................................................................................................14
Trouble shooting ..........................................................................................................................................................................14
Contact & support ........................................................................................................................................................................14

SHOWTEX INSTALLATION MANUAL

KABUKI 30

2

Summary of Contents for KABUKI 30














Reviews: