Trouble Shooting
What to do if the system stops working?
·
Verify that the system is correctly connected to the power supply.
·
Verify that all cables are connected to the correct outlets and that none
of them are damaged.
·
In case of DMX: The third channel (speed) must always be at least 5% open.
Otherwise, speed will be set to 0 and the system won’t respond.
If the soft limits were incorrectly set and the screen has reached the hard limits,
perform the following steps·
·
The system may only be operated manually in this case. (see STEP 4).
·
Roll out 1m of screen to release the hard limits. (see STEP 4).
·
Reset the soft limits (STEP 5).
·
Attention: The soft limits should only be considered when the system is connected to DMX.
The emergency stop was activated and the system stopped responding?
·
Wait 30 seconds before releasing the emergency stop to prevent regulator damage
(see STEP 4).
For more technical assistance please contact your local ShowTex office.
(see back cover of manual )
HAVE A GREAT SHOW!
14
ShowTex User Manual HSRU
Summary of Contents for HiSpeed Roll Up
Page 1: ...ShowTex User Manual HiSpeed Roll Up ...
Page 15: ...www showtex com ...
