01
20
DMX CHANNELS
37
000-009
010-019
020-029
030-039
040-049
050-059
060-069
070-079
080-089
090-099
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-189
190-199
200-209
210-219
220-229
230-239
240-249
250-255
38
000-051
052-101
102-152
153-203
204-255
www.eklights.com
●
●
●
●
●
●
●
●
●
●
●
●
●
SAFETY
Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information
about the installation, usage and maintenance of the unit.
WARNING
General instruction
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with.
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
risk an electric shock.
f
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
installe
r
. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
This unit is not for home use, only professional applications.
-in places wet;
-in places subject to vibrations or bumps;
-in places with an ambient temperature of over 45°
for an inspection or contact the manufacturer directly.
y, take it to a local recycling plant for a disposal
Warnings and installation precautions
If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
Before starting any maintenance work or cleaning the projector, cut o
●
Always additionally secure the projector with the safety rope. When carrying out any work, always comply
scrupulously with all the regulations (particularly regarding safety) currently in force in the country
’s being used.
●
For inside use only. Not designed for outside use.
air vents at the housing must not be covered in any case.
●
●
●
steady state, is high.
After power off, please cool down over 15 minutes.
●
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their e ffectiveness is impaired.
●
The lamp(LED) shall be changed if it has become damaged or thermally deformed.
●
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
Dimmer Speed mode
Dimmer Speed mode off
Dimmer Speed mode1(fast speed)
Dimmer Speed mode2 (middle speed)
Dimmer Speed mode3(slow speed)
Preset dimmer speed from display menu
Fr.shutters Rot. Reset (Hold 3 second)
Fr.shutters 1 M 1 Reset (Hold 3 second)
Fr.shutters 1 M 2 Reset (Hold 3 second)
Fr.shutters 1 M 3 Reset (Hold 3 second)
Fr.shutters 1 M 4 Reset (Hold 3 second)
Fr.shutters 1 M 5 Reset (Hold 3 second)
Fr.shutters 1 M 6 Reset (Hold 3 second)
Fr.shutters 1 M 7 Reset (Hold 3 second)
Fr.shutters 1 M 8 Reset (Hold 3 second)
No Function
Reset all (Hold 3 second)
No Function
No Function
Enable blackout while Pan/Tilt move (Hold 3 second)
Disable blackout while Pan/Tilt move (Hold 3 second)
Enable blackout while gobo change (Hold 3 second)
Disable blackout while gobo change (Hold 3 second)
Pan Reset (Hold 3 second)
Tilt Reset (Hold 3 second)
Gobo Reset (Hold 3 second)
Prism Reset (Hold 3 second)
Effect Reset (Hold 3 second)
Focus Reset (Hold 3 second)
Zoom Reset (Hold 3 second)
Frost Reset (Hold 3 second)
Iris Reset (Hold 3 second)
Control
