SHOWTEC XS-4W Quad Beam, Manual

Page: 15 / 28

14
Ordercode: 40174
XS-4W
Main Menu Options
DMX address
Pan/Tilt correction
Master/Slave
Display
Sound-controlled
Channel Mode (9CH / 28CH)
Manual
1. DMX Addressing
With this menu you can set the DMX address.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02)
Press the ENTER button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up / Down buttons to select the required address from .
04) Once you have set the desired DMX address, press the ENTER button to store your DMX address.
05) After 15 seconds the LCD display will show the chosen DMX address, but the A has changed into d.
2. Pan/Tilt correction
With this menu you can set the Pan/Tilt options.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to change the Pan/Tilt correction.
04) Press MENU to go 1 step back.
Normal Pan/Normal Tilt
Normal Pan/Inverse Tilt
Inverse Pan/Normal Tilt
Inverse Pan/Inverse Tilt
3. Slave Mode
With this menu you can set the Master or Slave.
01)
Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to change the setting from master to slave. .
04) Once you have set the desired Mode, press the ENTER button to store your setting.
05) If the device has been set to master, all slave devices will follow the master movement.
06) If the device has been set to slave, it will react the same as its master device.