14
Ordercode: 40173
XS-2 Dual Beam
2. Built-in Programs Mode
You can select 4 different programs when using the XS-2 Dual Beam.
01)
Press MODE until the display shows
, then press ENTER to open the menu and change your
settings.
02)
Use the Up/Down buttons to select one of the 4 programs.
2.1 DMX Advanced/Basic Mode
01)
When the display shows
, press ENTER to open the menu and change your settings.
02)
When the display shows
, the device has 20 Channels.
03)
When you press Up/Down, the display will show
. The device now has 17 channels.
04)
When you press Up/Down again, the display will show
. The device has now 10 channels.
2.2 Auto Mode
01)
Use the Up/Down buttons to scroll through the Running Mode.
02)
When the display shows
, press ENTER to open the menu and change your settings.
03)
You can choose one of 16 built-in programs by pressing the Up/Down buttons.
04)
Press ENTER to confirm your choice.
2.3 Sound-controlled Mode
01)
Use the Up/Down buttons to scroll through the Running Mode.
02)
When the display shows
, press ENTER.
03)
The device is now sound-controlled and will react to the music as it is equipped with a built-in
microphone which intercepts ambient sounds.
2.4 Slave Mode
01)
Use the Up/Down buttons to scroll through the Running Mode.
02)
When the display shows
, press ENTER.
03)
Now you can choose between two options:
•
If set to
S-1
, the slave device will imitate the actions performed by the master device.
•
If set to
S-2
, the slave device will still imitate the master device, but in reverse.
Summary of Contents for XS-2 Dual Beam
Page 13: ...12 Ordercode 40173 XS 2 Dual Beam Menu Overview...
Page 32: ...2014 Showtec...
