SHOWTEC Wipe Out 360 RGBW, User Manual

Page: 18 / 32

17
Ordercode: 42562
Wipe Out 360 RGBW
10) When the display shows , press the SETUP button to enter the menu.
11) Press the UP and DOWN buttons to manually adjust the speed of clockwise pan movement. The
adjustment range is between .
1.3 Manual Mode - Tilt
01) Repeatedly press the MODE button until the display shows .
02) Press the UP and DOWN buttons until the display shows .
03) Press the SETUP button to enter Tilt adjustment.
04) Press the UP and DOWN buttons to toggle between the 2 options:
 t-Auto
 t-Manul
05)
When the display shows , press the SETUP button to enter. In this mode, it is not possible to
adjust the tilt parameters.
06) When the display shows , press the SETUP button to enter.
07) Press the UP and DOWN buttons to manually adjust tilt movement. The adjustment range is between
.
2. Built-in Program Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the Auto Mode.
03) Press the UP and DOWN buttons to choose the desired automatic show. The adjustment range is
between .
04) The device will now run the chosen automatic show.
3. Sound-controlled Mode.
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the Sound-controlled Mode.
03) Press the UP and DOWN buttons to adjust the sound sensitivity of the device. The adjustment range is
between , from low to high sensitivity.
04) The device will now react to the beat of the background music.
4. DMX-512 Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the 2 options:
 Address
 Channel
04)
When the display shows , press the SETUP button to enter DMX address settings.
05) Press the UP and DOWN buttons to choose the desired DMX address. The adjustment range is
between .
06) When the display shows , press the SETUP button to enter channel mode menu.
07) Press the UP and DOWN buttons to choose one of the 3 channel modes:
 1 channel
 22 channels
 26 channels
5. Master/Slave Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) The device is now operating in Slave Mode. It means that it will react the same as the master device.