6
Description of the device
Features
The
Sunstrip Pro RGB
is a LED system from Showtec.
•
Voltage : AC 110V/60Hz or 220V/50Hz (CE)
•
Power consumption: Max. 110W
•
Fuse: 250V / T2A
•
Audio trigger: Built-in Mic
•
DMX Input : 3-pin XLR Male/Female connector
• Tilt 270
°
•
Beam angle: 15°
•
LED drive: Switch constant current LED driver
•
Light source: 36x 3W high intensity power 3-in-1(Red, Green, Blue) LEDs
•
Source life: >50,000 hours
•
Protection: LED drive protected against short-circuit and miss wire.
Driver protected by progressive thermal shutdown.
•
Color range: Single color or multi-color,16.7 million colors
•
Color resolution: 24-bit continuously variable intensity output range
•
Optical system: High precision optics
•
Control signal: DMX512 or internal control
•
Run mode: Stand alone, DMX512, Master/Slave or Sound-controlled
•
Control Modes: 8 CH,15 CH or111 CH
•
Refresh-rate: 400Hz suitable for use in TV studio
•
Connector: IEC IN and IEC OUT, up to 8 units may be connected.
•
LCD display will switch off automatically after 15 seconds
•
Housing: Precision aluminum
•
Only use Indoor
NOTE: Knowledge of DMX is required to fully utilize this unit.
Overview
Fig. 1
1)
36x 3W high intensity power 3-in-1(Red, Green, Blue) LEDs
2)
LCD Display and Menu buttons (Menu, Fun, Up, Down)
Backside
Fig. 2
3)
DMX signal connector (IN) 3-pin
4)
DMX signal connector (OUT) 3-pin
5)
ON/OFF
6)
IEC IN + Fuse 250V / T2A
7)
IEC OUT: Up to 8 units may be linked on IEC power link
