11
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Control Modes
There are 5 modes:
●
Static colors
●
Built-in programs
●
Sound-controlled
●
Master/Slave
●
DMX-512 (7CH, 28CH)
One Star Dream (Static colors and Built-in programs)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Plug the end of the electric mains power cord into a proper electric power supply socket.
03)
When the Star Dream is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 18–19 for more information about Static colors and Built-in programs.
One Star Dream (Sound-controlled)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Plug the end of the electric mains power cord into a proper electric power supply socket.
03)
Turn on the music. If the device is set to sound-control, then the Star Dream will react to the beat of
the music. Please see page 20 for more information about the sound-control options.
Multiple Star Dreams (Master/Slave control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Use a 3-pin XLR cable to connect the Star Dream.
The pins:
01) Earth
02) Signal -
03) Signal +
03)
Link the units as shown in Fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 18–20 (Static colors,
Built-in programs or Sound-controlled mode). This means that you can set your desired operation
mode on the master device and all slave devices will react the same as the master device.
However, the master device should be set to MASTER mode and slave devices to STAND ALONE
mode. See page 21 for more information.
Multiple Star Dreams (Master/Slave control)
Fig. 03
