7
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Quick-Programming
1)
Press Program Button until its LED lights up.
Note: If the LED does not light Program Button is set in Lock State (see Lock Function
on page 13)
2)
Select a Pattern Button you desire to program and tap it. Its LED will start to flash
indicating Program Mode Entered.
3)
Press and hold the desired Flash Button(s) for this step of the chase.
4)
Releasing all these Flash Button(s) will automatically record this step of the chase.
All LED will have a flash. Display Segment reads number of this step.
