SHOWTEC Revolution 250, User Manual

Page: 20 / 21

18
Product Specification
Model: Showtec Revolution 250
Voltage: 240V-50Hz (CE)
Power: 300W
Fuse: 5A / 250V
Dimensions: 400x426x460mm (LxWxH)
Weight: 19 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
Pan / Tilt 16 bit
DMX Channels: 12
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Lamp
Allowed lamp models*:
Showtec NSD 250/2 (2000 hr) (ordercode 82603)
Philips MSD 250 (3000 hr; 6700K) ordercode 80920P
Osram HSD 250 (3000 hr; 6000K) ordercode 80920O
Philips MSD 250/2 (2000 hr; 8500K) ordercode 80926P
Osram HSD 250/78 (1000 hr; 7800K) (ordercode 80933O)
Osram HSD 250/80 (1000 hr; 8000K) (ordercode 80935)
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Colors: 11 colors plus white
Gobos rotating: 2 rotating metal gobos, 4 rotating glass gobos and open
Colour-wheel with variable rotation speed
Gobo rotation: adjustable speed, position direction
Prism: 3-facer prism rotating in both directions at different speeds
All lenses are anti-reflection coated
High luminous-efficiency parabolic system
Strobe-effect with variable speed (1 flash -- 10 flashes/sec.)
DMX-control via standard DMX-controller
Pan 0º -- 360º
Tilt 0º -- 360º
Automatic Pan / Tilt position correction
Wheel control: auto-electronic reset
Gobos
Gobo diameter (metal or glass) 31 mm
Maximum image diameter 25 mm
Glass gobo: heat-resistant and intensify glass; dichroic glas coating
Max. ambient temperature
t
a
: 40°C; Max. housing temperature t
B
: 80°C
Cooling: 2 axial fans
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.