14
Ordercode: 33060
Performer Profile 600
Rotating the barrel assembly
01)
Loosen the barrel rotation control. It can be found directly behind the shutters on the underside of
the reflector housing (Fig 09).
Do not remove the barrel rotation control
.
02)
Rotate the barrel to the desired position.
03)
Once the barrel is positioned, tighten the barrel’s rotation control to lock it into position.
Fig. 09
Installation with clamp
You can choose an appropriate clamp from your dealer to fix the fixture to a trussing system and allows
you to adjust the position of the fixture once it is mounted. (Fig. 10).
01)
Tightly fasten the clamp to the mounting bracket with the provided pipe bolt and lock washer.
02)
Place the clamp on the truss, then tighten the bolt to secure it.
03)
Loosen the clamp pan screw and rotate the mounting bracket to the desired position.
04)
Tighten the pan screw to lock the fixture into position.
Fig. 10
