10
Ordercode: 42540
Par 64 LED-120Z-Q4
Control Modes
There are 4 modes:
●
Color Macros/Color Programs
●
Manual
●
Master/Slave
●
DMX-512 (4CH, 7CH, 11CH)
One Par (Manual, Color Macros/Color Programs)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Plug the end of the electric mains power cord into a proper electric power supply socket.
04)
When the Par is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 17 and 19 for more information about Color macros/Color programs and Manual
mode.
Multiple Pars (Master/Slave control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 3-pin XLR cable to connect the Par.
The pins:
01) Earth
02) Signal -
03) Signal +
04)
Link the units as shown in fig. 05. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 17 and 19 (Color
macros/Color programs and Manual mode). This means that you can set your desired operation
mode on the master device and all slave devices will react the same as the master device.
Multiple Pars (Master/Slave control)
Fig. 05
