background image

 

  

 

 

   

 

Ordercode: 40225 

Mini Q-Strobe 

IMPORTANT: 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual or any unauthorized modification to the device.

 

 

 

Never let the power cord come into contact with other cables! Handle the power cord and all 
connections with the mains with particular caution! 

 

Never remove warning or informative labels from the unit. 

 

Never leave any cables lying around. 

 

Do not insert objects into air vents. 

 

Do not connect this device to a dimmer pack. 

 

Do not open the device and do not modify the device. 

 

Never use the device during thunderstorms, unplug the device immediately. 

 

Never look directly into the light source. 

 

Do not switch the device on and off in short intervals, as this would reduce the system’s life. 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

Only use device indoors, avoid contact with water or other liquids. 

 

Only operate the fixture after having checked that the housing is firmly closed and all screws are 
tightly fastened. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Only operate the device after having familiarized with its functions. 

 

The cable insert in the device must never be strained. There must always be sufficient cable to the 
device. Otherwise, the cable may be damaged which may lead to deadly electrical shocks. 

 

If the external cable is damaged, it has to be replaced by a qualified technician. 

 

Never switch the lamp on if the housing cover is open. 

 

Always allow free air space of at least 50 cm around the unit for ventilation. 

 

Always disconnect power from the mains, when device is not used or before cleaning! Only handle 
the power cord by the plug. Never pull out the plug by tugging the power cord. 

 

Make sure that the device is not exposed to extreme heat, moisture or dust. 

 

Make sure that the available voltage is not higher than stated on the rear panel. 

 

Make sure that the power cord is never crimped or damaged. Check the device and the power 
cord from time to time. 

 

If the housing cover is obviously damaged, it has to be replaced, so that its functions are not 
impaired, due to cracks or deep scratches. 

 

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your device. Leave the 
device switched off until it has reached room temperature. 

 

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Showtec dealer for service. 

 

For adult use only. The fixture must be installed out of the reach of children. Never leave the unit 
running unattended. 

 

The user is responsible for correct positioning and operating of the Mini Q-Strobe. The manufacturer 
will not accept liability for damages caused by the misuse or incorrect installation of this device. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

WARRANTY: Till one year after date of purchase. 

 

 

 

 

Summary of Contents for Mini Q-Strobe













Reviews: