10
Maintenance
The Showtec
LED Sphere Direct Control 30
requires almost no maintenance. However, you should keep the
unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse
in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric
power.
Troubleshooting
Showtec LED Sphere Direct Control 30
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps.
1.
If the device does not operate properly, unplug the device.
2.
Check power from the wall, all cables, the fuse, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If nothing happens after 30 seconds, unplug the device.
5.
Return the device to your Showtec dealer.
Summary of Contents for led spere direct control 30
Page 1: ...LED Spere Direct Control 30 ORDERCODE 41125...
Page 14: ...2007 Showtec...
