SHOWTEC LED Powerbar 12 User Manual Download Page 5

 

 

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your device. Leave the 
device switched off until it has reached room temperature. 

 

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Showtec dealer for service. 

 

For adult use only. The device must be installed out of the reach of children. Never leave the unit 
running unattended. 

 

For replacement use fuses of same type and rating only. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

WARRANTY: Till one year after date of purchase. 

 
 

OPERATING DETERMINATIONS 

If this device is operated in any other way, than the one described in this manual, the product may suffer 
damages and the

 

warranty becomes void.  

 

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc. 

 

You endanger your own safety and the safety of others! 
 
 

Rigging 

Please follow the European and national guidelines concerning rigging, trussing and all other 
safety issues. 

 

Do not attempt the installation yourself ! 
Always let the installation be carried out by an authorized dealer !

 

 

Procedure: 

 

If the LED Powerbar 12 is lowered from the ceiling or high joists, professional trussing systems have to 
be used. 

 

Use a clamp to mount the LED Powerbar 12, with the mounting-bracket, to the trussing system. 

 

The LED Powerbar 12 must never be fixed swinging freely in the room.  

 

The installation must always be secured with a safety attachment, e.g. an appropriate safety net or 
safety-cable. 

 

When rigging, derigging or servicing the LED Powerbar 12, always make sure, that the area below the 
installation place is blocked and staying in the area is forbidden.

 

 
The LED Powerbar 12 can be placed on a flat stage floor or mounted to any kind of truss by a clamp. 
 

Connection with the mains

 

Connect the device to the mains with the power-plug. 
Always pay attention, that the right color cable is connected to the right place.

 

 

 International 

EU Cable 

UK Cable 

US Cable 

Pin 

BROWN 

RED 

YELLOW/COPPER 

FASE 

BLUE 

BLACK 

SILVER 

NUL 

 

YELLOW/GREEN 

GREEN 

GREEN 

EARTH 

 
Make sure that the device is always connected 

properly

 to the earth!  

 

Improper installation can cause serious damage to people and property !

 

Summary of Contents for LED Powerbar 12














Reviews: