7
You can change the speed by turning the speed button (
3
).
faster
slower.
DMX Operation
The PowerBank will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED (
2
) will blink.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX cable
and the DMX controller must be turned on.
The LED PowerBank 48 system can operate as a 12-, 6-, or 3-channel DMX fixture. Select DMX Mode 1, 2,
or 3 as described on the facing page.
DMX MODE:
on 3 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 6 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 12 channel mode (R:0-100%, G:0-100%, B:0-100%)
Stand-alone mode- 3 channels (25 built-in effects, speed/strobe, illumination)
Users can test Stand-alone Mode by setting the dip-switches to Stand-alone Mode, without using a DMX
controller. Users have to disconnect the DMX cables before testing Stand-alone Mode.
In DMX mode, you can adjust the audio input level, using the sensitivity control on the back panel of the
Controller.
Summary of Contents for LED PowerBank 48
Page 1: ...LED PowerBank 48 ORDERCODE 41310 ...
Page 12: ...2006 Showtec ...
