5
Installation
Remove all packing materials from the
LED Pixel Track
. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Panel Functions
Summary of Contents for LED Pixel Track
Page 1: ...LED Pixel Track ORDERCODE 42200...
Page 13: ...2005 Showtec...
