background image

 

  

 

 

   

 

Ordercode: 42421-01 

LED Par 56 Short 

 

The user is responsible for correct positioning and operating of the LED Par 56 Short. The manufacturer 
will not accept liability for damages caused by the misuse or incorrect installation of this device. 

 

This device falls under protection class I. Therefore it is essential to connect the yellow/green 
conductor to earth. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

WARRANTY: Till one year after date of purchase. 

 

 

 

Operating Determinations 

 

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

 

The minimum distance between light output and the illuminated surface must be bigger than 1 
meter. 

 

The maximum ambient temperature t

a

 = 40°C must never be exceeded. 

 

The relative humidity must not exceed 50 % with an ambient temperature of 40° C. 

 

If this device is operated in any other way than the one described in this manual, the product may 
suffer damages and the

 

warranty becomes void. 

 

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc. 

 
You endanger your own safety and the safety of others! 
 

Rigging 

Please follow the European and national guidelines concerning rigging, trussing and all 
other safety issues. 

 

Do not attempt the installation yourself ! 
Always let the installation be carried out by an authorized dealer !

 

 

Procedure: 

 

If the Parcan is lowered from the ceiling or high joists, professional trussing systems have to be used. 

 

Use a clamp to mount the Parcan, with the mounting bracket, to the trussing system. 

 

The Parcan must never be fixed swinging freely in the room.  

 

The installation must always be secured with a safety attachment, e.g. an appropriate safety net or 
safety cable. 

 

When rigging, derigging or servicing the Parcan, always make sure, that the area below the 
installation site is secured and that there are not any unauthorized people around. 

 

 

Summary of Contents for LED Par 56 Short V2 42421-01

























Reviews: