10
Ordercode: 60906
FX Shot MKII
Installation
Remove all packing materials from the FX Shot. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
In order to carry out a proper and safe installation, act according to the following steps:
Step 1
01)
Place the FX Shot on a flat, stable surface and secure it. It is possible to install 1, 2, or 4 FX Shots on the
base plate.
02)
If the FX Shot is mounted onto a truss system, install 2 certified truss clamps (70332) at the bottom of
the FX Shot.
03)
Place the FX Shot in the desired position on the truss system and tighten the clamps securely.
04)
Always use a safety cable to secure the FX Shot to the truss system.
05)
You can link multiple FX Shots together via Neutrik Power OUT - Neutrik Power IN.
Summary of Contents for FX Shot MK II
Page 19: ...18 Ordercode 60906 FX Shot MKII Dimensions...
Page 20: ...2019 Showtec...
