SHOWTEC Explorer 575 Wash MKII, User Manual

Page: 16 / 27

14
Remotely controllable functions
Shutter/Dimmer/Strobe
The dimming (0-100%) is provided by a simple mechanical shutter unit. This unit may also be used for
strobe effect (1-10 flashes per second).
Stand-alone Mode
The fixture can execute 2 pre-set programs.
Use the MENU button to set the fixture to Auto_1 or Auto_2. The Explorer will now play its built-in program
.
For synchronous operation of multiple fixtures the fixtures must all be connected on a data-link.
Note: Disconnect the fixtures from the DMX controller before operating, otherwise data collisions can
occur and the fixtures will not work properly!
It’s necessary to insert the XLR termination plug (with 120 Ohm ) into the input of the first fixture and into
the output of the last fixture in the data-link, in order to ensure proper transmission on the data link.
Addressing
With this menu you can set the DMX address or address a fixture as a master/slave.
001 - DMX addressing
1) Press MENU until the display shows , then press ENTER. The display will now show 001.
2) And press and to select the required address 001 – 512, press ENTER to confirm.
3) Press MENU, the chosen address is shown on the display.