15
Remotely controllable functions
Rainbow Colour-wheel
The Explorer contains a colour-wheel with 10 colour positions. 9 dichroic colours and one white. It is also
possible to rotate the colour-wheel continuously at different speeds ( “Rainbow effect” in both directions).
Static Colour-wheel
The Explorer contains a colour-wheel with 10 colour positions. 7 dichroic colours, 3200ºK, 6000ºK and one
white.
Static gobo-wheel
This static gobo-wheel has 9 metal gobos and open. The gobos have an outside diameter of 27 mm and an
image diameter of 23 mm.
Rotating gobo-wheel
This rotating gobo-wheel has 3 metal gobos, 3 glass gobos and open. The gobos have an outside diameter
of 27 mm and an image diameter of 23 mm.
Shutter/Dimmer/Strobe
The dimming (0-100%) is provided by a simple mechanical shutter unit. This unit may also be used for
strobe effect (1-10 flashes per second).
Stand-alone Mode
The fixture can execute 1 pre-set program.
Use the Mode-button to set the fixture to RUN and choose PR6.1. The Explorer will now play its built-in
program
.
For synchronous operation of multiple fixtures the fixtures must all be connected on a data-link.
Note: Disconnect the fixtures from the DMX controller before operating, otherwise data collisions can occur
and the fixtures will not work properly!
It’s necessary to insert the XLR termination plug (with 120 Ohm ) into the input of the first fixture and into
the output of the last fixture in the data-link, in order to ensure proper transmission on the data link.
Addressing
With this menu you can set the DMX address or address a fixture as a master/slave.
- DMX addressing
1)
Press Mode until the display shows ADDR then press Enter. The display will now show
.
2)
And press
and to select the required address
, press Enter to confirm.
3)
Press Mode
, t
he chosen address is shown on the display.
