15
Ordercode: 44057
EventSpot 1600 Q4 Set
Multiple EventSpots (Wireless DMX Control)
01)
Place the EventSpots at the desired position (see page 16 for maximum WiFi distance).
02)
When the W-DMX LED indicator (C) is blinking (green), the device is searching for a connection.
03)
Connect the transmitter with multiple EventSpots. In order to create a wireless match, please check
the manual of your wireless signal transmitter.
04)
When there is a connection, the W-DMX LED indicator (C) from the EventSpot will light up green.
05)
Use a DMX-cable to link the transmitter with a suitable lightcontroller.
Setup example wireless DMX
Fig. 09
